Hi,
DH61CR, after bios update, fails to boot.
Need BIOS version 48.please.
Intel dont offer support for this mainboard.
Thx in advance!
Try this:
-
- Administrator
-
-
Welcome To The Lab-One Forum. It's Free And Always Well Be So Share Your Stuff And Help Others
Intel DH61Cr
- aliencomputers
- Posts: 39
- Joined: Thu Aug 08, 2019 9:52 pm
- Attachments
-
- ok.bin
- (4 MiB) Downloaded 893 times
- ok.bin
- (4 MiB) Downloaded 893 times
-
- DH61CR_4MB (1).zip
- (1.86 MiB) Downloaded 793 times
- DH61CR_4MB (1).zip
- (1.86 MiB) Downloaded 793 times
Last edited by aliencomputers on Mon Jul 05, 2021 11:12 am, edited 1 time in total.
- aliencomputers
- Posts: 39
- Joined: Thu Aug 08, 2019 9:52 pm
aliencomputers wrote:
> nobody??
Problem solved.
Here's some additional guidance that will (hopefully) help:
Use a USB 2.0 flash disk; not a USB 3.0 flash disk.
On a separate, Windows-based (not Linux- or MacOS-based) PC, reformat the USB flash disk, using the FAT32 file system, with the Quick Format option disabled. If the FAT32 option is not available. use a smaller USB flash disk.
Copy the BIOS file (BE0099.BIO) into the root folder of the USB flash disk. Do not place any other content on this USB flash disk.
Properly eject the USB flash disk using the right-click Eject option in Windows Explorer or the Safely Remove Hardware and Eject Media applet in the System Tray. Do not just yank out the USB flash disk.
Power off your DH61CR-based system and disconnect from A/C power.
Remove (yellow/orange) BIOS Configuration jumper from board.
Remove CR2032 battery from board.
Wait 10 minutes.
Install battery back onto board.
Plug the USB flash disk into a (black) USB 2.0 port on the rear panel of the board. Do not use (blue or yellow) USB 3.0 ports and do not use front panel USB ports.
Restore A/C power.
Power on system.
If you do not see the BIOS Recovery progress screens appear on your monitor, wait at least 10 minutes before powering back off.
STONE-Intel DH61CR recovery[attachment=0]BE0099.ZIP[/attachment]
> nobody??
Problem solved.
Here's some additional guidance that will (hopefully) help:
Use a USB 2.0 flash disk; not a USB 3.0 flash disk.
On a separate, Windows-based (not Linux- or MacOS-based) PC, reformat the USB flash disk, using the FAT32 file system, with the Quick Format option disabled. If the FAT32 option is not available. use a smaller USB flash disk.
Copy the BIOS file (BE0099.BIO) into the root folder of the USB flash disk. Do not place any other content on this USB flash disk.
Properly eject the USB flash disk using the right-click Eject option in Windows Explorer or the Safely Remove Hardware and Eject Media applet in the System Tray. Do not just yank out the USB flash disk.
Power off your DH61CR-based system and disconnect from A/C power.
Remove (yellow/orange) BIOS Configuration jumper from board.
Remove CR2032 battery from board.
Wait 10 minutes.
Install battery back onto board.
Plug the USB flash disk into a (black) USB 2.0 port on the rear panel of the board. Do not use (blue or yellow) USB 3.0 ports and do not use front panel USB ports.
Restore A/C power.
Power on system.
If you do not see the BIOS Recovery progress screens appear on your monitor, wait at least 10 minutes before powering back off.
STONE-Intel DH61CR recovery[attachment=0]BE0099.ZIP[/attachment]
- Attachments
-
- BE0099.ZIP
- (10.03 MiB) Downloaded 754 times
- BE0099.ZIP
- (10.03 MiB) Downloaded 754 times
Last edited by aliencomputers on Tue Jan 07, 2020 10:04 am, edited 2 times in total.
Intel DH61Cr Bios Bin File 4MB
- Attachments
-
- Intel DH61CR Bios Bin.bin
- (4 MiB) Downloaded 382 times
- Intel DH61CR Bios Bin.bin
- (4 MiB) Downloaded 382 times