Page 1 of 1
TP.MT5507.PC821 USB Firmware Software Bios Bin
Posted: Mon Aug 19, 2019 7:36 pm
by Sandeep
TP.MT5507.PC821 USB Firmware Software Bios Bin
Factory Service Code: Menu +1147
https://drive.google.com/file/d/1rAlYSA ... sp=sharing
Re: TP.MT5507.PC821 USB Firmware Software Bios Bin
Posted: Wed Apr 29, 2020 12:37 pm
by ivanndrey620
It doesn't work, I ruin my tv
ArruinĂ³ mi televisor , ahora no enciende
Re: TP.MT5507.PC821 USB Firmware Software Bios Bin
Posted: Wed Apr 29, 2020 3:05 pm
by admin
What was the problem with the file? Had you checked the motherboard part number before writing this file?
and What was the problem with your tv before and after writing this file?
Re: TP.MT5507.PC821 USB Firmware Software Bios Bin
Posted: Thu Dec 12, 2024 12:12 am
by Sandeep
=} Always make the backup of your original BIOS. Download BIOS at your own risk. Any mishap to your LCD LED is not our responsibility.
What Is Bios?
The BIOS is low-level software that is responsible for initializing the computer's hardware and providing basic instructions for the operating system to load.
The acronym BIOS means Basic Input and Output System. It is responsible for carrying out essential tasks, such as recognizing installed hardware, checking the time on the internal clock and initializing the operating system.
Without the BIOS, the computer would not be able to boot properly as it is the first software to run when the computer is turned on.
Mechanism Of BIOS In Computer Systems:
When using a notebook, you have most likely come across the word BIOS in the settings. This tool is responsible for performing a series of tasks on your computer.
The moment you turn on your PC, the BIOS identifies all the components connected to the motherboard, the information saved in the CMOS (which stores the board's configuration parameters, accessible through the Setup menu), such as which drive will be loaded first, changes the processor speed (overclock and underclock) and also checks the internal clock.
Once the BIOS confirms that everything is fine, it loads the boot from the first drive defined in the setup and then passes control to the operating system.