Lab-One Forum

Hi,

Have two of this mainboard brand new.Both power up but no screen.


I ll put two cpu,two psu and many bars of ram.If i take off the buzzer no beep.

Try to write bios chip with first or last bios on the Asrock site,my programmer EZP 2019 said file its too long .

https://www.asrock.com/mb/Intel/H170M%2 ... o.asp#BIOS

Original bios bin it was on mainboard chip saved.

Thx.

Flash BIOS with ch341a programmer black and the bios ver 7.20 on official site.-with the original bios chip on the motherboard.
One of them powering up,and have bios post.

aliencomputers wrote:
> Flash BIOS with ch341a programmer black and the bios ver 7.20 on official
> site.-with the original bios chip on the motherboard.
> One of them powering up,and have bios post.

And the second mb its been resurrected.