hi, the motherboard is a 6050A2728501 MB-A01, the serial number is 5CG7151JJX, the notebook turns on but with a black screen and a high speed fan, I think the problem is one or both of the corrupt bios, I did the bios bekup from U365 chip: MX25L12873 but reading the DMI it shows an 850 G3 while on the rear cover it says 850 G4, I don't know which bios to look for or maybe they are the same?
Thank you
-
- Administrator
-
-
Welcome To The Lab-One Forum. It's Free And Always Well Be So Share Your Stuff And Help Others
hp elitebook 850 G4 bios bin
What Is Bios?
The BIOS is low-level software that is responsible for initializing the computer's hardware and providing basic instructions for the operating system to load.
The acronym BIOS means Basic Input and Output System. It is responsible for carrying out essential tasks, such as recognizing installed hardware, checking the time on the internal clock and initializing the operating system.
Without the BIOS, the computer would not be able to boot properly as it is the first software to run when the computer is turned on.
Mechanism Of BIOS In Computer Systems:
When using a notebook, you have most likely come across the word BIOS in the settings. This tool is responsible for performing a series of tasks on your computer.
The moment you turn on your PC, the BIOS identifies all the components connected to the motherboard, the information saved in the CMOS (which stores the board's configuration parameters, accessible through the Setup menu), such as which drive will be loaded first, changes the processor speed (overclock and underclock) and also checks the internal clock.
Once the BIOS confirms that everything is fine, it loads the boot from the first drive defined in the setup and then passes control to the operating system.
The BIOS is low-level software that is responsible for initializing the computer's hardware and providing basic instructions for the operating system to load.
The acronym BIOS means Basic Input and Output System. It is responsible for carrying out essential tasks, such as recognizing installed hardware, checking the time on the internal clock and initializing the operating system.
Without the BIOS, the computer would not be able to boot properly as it is the first software to run when the computer is turned on.
Mechanism Of BIOS In Computer Systems:
When using a notebook, you have most likely come across the word BIOS in the settings. This tool is responsible for performing a series of tasks on your computer.
The moment you turn on your PC, the BIOS identifies all the components connected to the motherboard, the information saved in the CMOS (which stores the board's configuration parameters, accessible through the Setup menu), such as which drive will be loaded first, changes the processor speed (overclock and underclock) and also checks the internal clock.
Once the BIOS confirms that everything is fine, it loads the boot from the first drive defined in the setup and then passes control to the operating system.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1 Replies
- 3203 Views
-
Last post by karmabn
Thu Apr 03, 2025 2:51 pm
